Two-Dimensional Covalent and Supramolecular Polymers: From Monolayer to Bilayer and the Thicker

Selective preparation of two-dimensional polymers (2DPs) and supramolecular polymers (2DSPs) with defined thickness is crucially important for controlling and maximizing their functions, yet it has remained as a synthetic challenge. In the past decade, several approaches have been developed to allow selective preparation of discrete monolayer 2DPs and 2DSPs. Recently, crystal exfoliation and self-assembly strategies have been employed to successfully prepare bilayer 2DP and 2DSP, which represent the first step towards the controlled “growth” of 2D polymers from the thinnest monolayers to thicker few-layers along the third dimension. This Concept review discusses the concept of accurate synthesis of 2D polymers with defined layers. Advances in this research area will pave the way to rational synthetic strategies for 2D polymers with controlled thickness.     

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([C_n-mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir–Blodgett films. It is inferred from the surface pressure-area isotherms that C₁₆-mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C₄- and C₈-mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C₈- or C₁₆-mim-IL is present in the mixed films.     

Elucidating the Influence of Electrical Potentials on the Formation of Charged Oligopeptide Self-Assembled Monolayers on Gold

Self-assembled monolayers (SAMs) based on oligopeptides have garnered immense interest for a wide variety of innovative biomedical and electronic applications. However, to exploit their full potential, it is necessary to understand and control the surface chemistry of oligopeptides. Herein, we report on how different electrical potentials affect the adsorption kinetics, stability and surface coverage of charged oligopeptide SAMs on gold surfaces. Kinetic analysis using electrochemical surface plasmon resonance (e-SPR) reveals a slower oligopeptide adsorption rate at more positive or negative electrical potentials. Additional analysis of the potential-assisted formed SAMs by X-ray photoelectron spectroscopy demonstrates that an applied electrical potential has minimal effect on the packing density. These findings not only reveal that charged oligopeptides exhibit a distinct potential-assisted assembly behaviour but that an electrical potential offers another degree of freedom in controlling their adsorption rate.     

Cu-Doped MoSi2N4 Monolayer as a Potential NH3 Sensor

Cu doped MoSi₂N₄ monolayer (Cu-MoSi₂N₄) was firstly proposed to analyze adsorption performances of common gas molecules including O₂, N₂, CO, NO, NO₂, CO₂, SO₂, H₂O, NH₃ and CH₄ via density functional theory (DFT) combining with non-equilibrium Green's function (NEGF). The electronic transport calculations indicate that Cu-MoSi₂N₄ monolayer has high sensitivity for CO, NO, NO₂ and NH₃ molecules. However, only NH₃ molecule adsorbs on the Cu-MoSi₂N₄ monolayer with moderate strength (−0.55 eV) and desorbs at room temperature (2.36×10⁻³ s). Thus, Cu-MoSi₂N₄ monolayer is demonstrated as a potential NH₃ sensor.     

Synthesis and luminescent properties of a silylated-terpyridine derivative and its metalated complexes in solutions and self-assembled monolayers

A silylated-terpyridine(Si TPy) derivative was newly synthesized and reacted with various transition metal ions in the solutions and self-assembled monolayers(SAMs).Composition and morphology of the SAMs were characterized by using absorption spectra,X-ray photoelectron spectra and atomic force microscope.The silylated-TPy compound gave off a luminescent emission at about 456 nm,which slightly shifted to 452 nm in the Zn2+-Si TPy and Fe2+-Si TPy metalated complexes.The absorbed energy can be further transferred to lanthanide ions(Tb3+and Eu3+) to give off the typical emissions of the lanthanide complexes together with an emission of the silylated-TPy at about 363 nm.     

Synthesis and antibacterial activity of versatile substrate‐coated biocidal material via catechol chemistry

We report a potential coating material showing durable and significant antimicrobial activity for preserving the surfaces of a broad range of materials. The structure of the prepared antimicrobial adhesive material features a catechol moiety of dopamine hydrochloride conjugated to 4‐bromobutanoyl chloride as an adhesive material. Antimicrobial properties against a wide range of microorganism species are achieved by quaternizing a long hydrophobic chain (N,N'‐dimethyldecylamine) onto 3,4‐dihydroxyphenylalanine (Dopa) to afford the prepared material (Dopa‐decyl). The successful formation of Dopa‐decyl is confirmed by hydrogen nuclear magnetic resonance (¹H‐NMR) and attenuated total reflectance‐infrared (ATR‐IR) measurements. The chemical composition of the quaternized adhesive material (Dopa‐decyl) is characterized by X‐ray photoelectron spectroscopy (XPS). Investigation of the antimicrobial activity of the Dopa‐decyl‐coated film against both gram‐positive Staphylococcus aureus (S. aureus) and gram‐negative Escherichia coli (E. coli) stains reveals a highly efficient antimicrobial effect under both normal and extreme stress conditions due to the biocidal effect of the quaternized amine when the materials are applied on the surface of various substrates. Copyright © 2014 John Wiley & Sons, Ltd.     

Investigation on the Surface‐Confined Self‐Assembly Stabilized by Hydrogen Bonds of Urea and Amide Groups: Quantitative Analysis of Concentration Dependence of Surface Coverage

Formation of a hydrogen‐bond network via an amide group is a key driving force for the nucleation–elongation‐type self‐assembly that is often seen in biomolecules and artificial supramolecular assemblies. In this work, rod‐coil‐like aromatic compounds bearing an amide ( 1 a – 3 a ) or urea group ( 1 u – 3 u ) were synthesized, and their self‐assemblies on a 2‐D surface were investigated by scanning tunneling microscopy (STM). According to the quantitative analysis of the concentration dependence of the surface coverage, it was revealed that the strength of the hydrogen bond (i.e., amide or urea) and the number of non‐hydrogen atoms in a molecular component (i.e., size of core and length of alkyl side chain) play a primary role in determining the stabilization energy during nucleation and elongation processes of molecular ordering on the HOPG surface.     

Investigations into wetting and spreading behaviors of impacting metal droplet under ultrasonic vibration control

Ultrasonic-assisted metal droplet deposition (UAMDD) is currently considered a promising technology in droplet-based 3D printing due to its capability to change the wetting and spreading behaviors at the droplet-substrate interface. However, the involved contact dynamics during impacting droplet deposition, particularly the complex physical interaction and metallurgical reaction of induced wetting-spreading-solidification by the external energy, remain unclear to date, which hinders the quantitative prediction and regulation of the microstructures and bonding property of the UAMDD bumps. Here, the wettability of the impacting metal droplet ejected by a piezoelectric micro-jet device (PMJD) on non-wetting and wetting ultrasonic vibration substrates is studied, and the corresponding spreading diameter, contact angle, and bonding strength are also discussed. For the non-wetting substrate, the wettability of the droplet can be significantly increased due to the extrusion of the vibration substrate and the momentum transfer layer at the droplet-substrate interface. And the wettability of the droplet on a wetting substrate is increased at a lower vibration amplitude, which is driven by the momentum transfer layer and the capillary waves at the liquid–vapor interface. Moreover, the effects of the ultrasonic amplitude on the droplet spreading are studied under the resonant frequency of 18.2–18.4 kHz. Compared to deposit droplets on a static substrate, such UAMDD has 31% and 2.1% increments in the spreading diameters for the non-wetting and wetting systems, and the corresponding adhesion tangential forces are increased by 3.85 and 5.59 times.     

The metallic C6S monolayer with high specific capacity for K-ion batteries

K-ion batteries (KIBs) attract considerable attention due to the abundance of K, high-working voltages, and chemical similarity with Li, enabling the utilization of mature Li-ion technology. However, shortage of high-performance anode materials is a critical obstacle for the development of KIBs. Through first-principles swarm-intelligence structural search, we identify a potential anode material, the C₆S monolayer, which provides not only a remarkably high specific capacity of 1546 mAh/g but also a low diffusion barrier of 0.11 eV and a low open-circuit voltage of 0.21 V. Inherent metallicity originates from delocalized π electrons.     

Controlled electropolymerization based on self-dimerizations of monomers

Electropolymerization is one of the most important methodologies to synthesize and develop conducting polymers. The complexity of the polymerization mechanism, ion doping processes and structural defects are considered to be symbiotic and unavoidable, making the stagnant state and huge band gap with advanced interdisciplinary research fields and important applications in the last three decades. Herein, we provide a point of view into controlled electropolymerization by regioselective activation reactions of monomers, where self-dimerizations instead of self-electropolymerizations were utilized. The resulting dimers play a role in the connections between functional building blocks to form functional polymers on demand. This account highlights the typical findings in controlled electropolymerizations as a forum for discussing new opportunities in exploiting novel designs and applications.